Syracuse Water Heater Venting Options

Posted by on May 13, 2014 in Water Heater Repair Syracuse NY

The following concepts about appropriate water heater venting from Water Heater Repair Syracuse NY below are shared in order for house owners to have a general understanding of exactly how the different types of venting work. They are not planned to be how-to directions for house owners to perform themselves. The training and licensing of an expert plumbing repair service expert is very important.

In terms of venting, water heaters are typically vented in 2 methods; direct vent water heaters and power vent water heaters. So what is the leading distinction between the 2 styles of water heaters? A direct vent water heater vents the combustion gases created from the water heater’s burner directly to the atmosphere, while a power vent water heater eliminates them with the help of a powered ventilation fan.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent Syracuse Water Heaters

With a direct vent water heater, the heat generated during the combustion procedure is utilized to heat the water. The exhaust gases are then transferred to the exterior of the home via the exhaust pipe or chimney.

With direct venting, it works with the process that heated air is lighter than cool air and in turn will rise normally due to the difference in buoyancy between the hot and cold air. This is a good simple system that works well when the exhaust gases can be vented vertically. No extra power is required, and in turn the overall hot water heating costs are lower.

The following video explains in more detail the details of a direct vent system:

Power Vent Syracuse Water Heaters

Power vent water heaters utilizes a fan or blower to assist in the removal of exhaust gases from the hot water heater. For houses that do not have access to a vertical vent or chimney, power vent water heater might be the only choice. With using a fan or blower, exhaust gases can be pressed with horizontal exhaust vent pipes.

The primary advantage of a power vent water heater then is the ability to locate the water heater away from a chimney. Or if there is no chimney offered, to save money by horizontally venting it to the outside through affordable venting pipe rather.

The downsides of a power vent system against a direct vent heater are that power vent heaters will cost more at first because of the extra devices (fan/blower) needed for the install. Also, one will likewise have to run a power line to the fan. This too, will contribute to the expense.

Another downside is that the blower section of the water heater will need electrical energy to run. This will raise the hot water heating costs throughout it’s life time, though not that significantly.

And lastly, the blower noise can be heard running when the hot water heater is running. While it’s most likely only a minor concern, it’s something that will be seriously considered. Appropriate setup can assist to remove, or at least minimize the majority of this.

Though there are some differences between the two types, it really depends on a home’s specific situation, in relationship to the location it is to be installed, and the ability to add a vent path to the outside of the house.  Syracuse Water Heater Repair recommends taking a look at the ENERGY STAR info right here too in terms of the various energy efficiency ratings for the different types of sorts of heaters.

Enhanced by Zemanta