Blog

Advice and tips for homeowners on how to best take care of their water heater from Water Heater Repair Syracuse NY.

How to Increase Water Heater Energy Efficiency

Posted by on Jun 13, 2014 in Water Heater Repair Syracuse NY | 0 comments

Not too many of our clients at Water Heater Repair Syracuse NY do not wish to be as energy efficient as possible with all their house costs, including their water heating expense. So, we chose to assemble a list of things that will help property owners do just that.Water Heater Repair Syracuse NY

energysavers.gov estimates that 14-25 percent of a house’s energy use is from heating water, and it likewise comprises part of the electric bill too. The following ideas will help make best use of ones water heater’s efficiency.

  • Depending upon the amount and frequency of the requirement for hot water, a tankless water heater could be a good financial investment come time to have a water heater replacement. They are more expensive than standard storage tank water heaters, but over the life time of the unit can be more cost effective. Not to mention the potential energy savings of running the tankless water heater.
  • If the temperature of the heater is set above 120 degrees, decreasing it can conserve some energy usage too.
  • If one is fortunate enough to be building a brand-new home or doing a remodel, attempt to position the water heater as close the area of the house that will certainly use the most hot water. Water heat lost while traveling through the pipes will certainly be decreased.
  • A solar water heater might be an excellent financial investment too, and not as dependent upon the location of the country one resides in as many people would believe. Heck, one can even make one with the amount of details online, however as plumbers ourselves, we would enjoy to aid.
  • Insulate, insulate and insulate even more. All exposed pipes, not just the hot water ones, should be wrapped in insulation. One can consider making use of a water heater jacket or blanket in the cold weather period to help keep the heat inside the storage tank. New tank water heaters are made well with a nice insulation value, but every bit will certainly assist.
  • This could be tough to do (at least I know it would be in my house with a number of women) however take much shorter showers.
  • When replacing a water heater, see to it it is the correct size for the amount of water that will be used typically. Many times we see that house owners have too large of a water heater, which increases the amount of energy needed to heat up the water … and water that will certainly not be used.

Syracuse water heaters are relatively maintenance free however a yearly assessment and some small maintenance will help prolong its life span and conserve money with it running at maximum performance. Give us a call to schedule a yearly check.

Syracuse Water Heater Carbon Monoxide Poising Prevention

Posted by on Jun 6, 2014 in Water Heater Repair Syracuse NY, Water Heater Safety | 0 comments

We have just recently seen a couple of news reports about carbon monoxide poising being linked back to a water heater as the source and so felt it essential to inform some about that possibility today. Yes, any nonrenewable fuel source burning appliance creates this fatal gas. Including water heaters. However, with the appropriate setup of the water heater, together with periodic maintenance, and a working carbon monoxide gas detector in the house, one can sleep safely.

Reasons for Carbon Monoxide PoisoningWater Heater Repair Syracuse NY

Carbon monoxide (CO) is a colorless, odor free gas that is a bi-product of the burning of a nonrenewable fuel source like wood, gasoline, coal, natural gas, or kerosene. Breathing in carbon monoxide gas fumes not only prevents oxygen from being made use of properly by the body, but likewise triggers damage to the central nervous system. Persons with existing wellness issues such as heart and lung disease are particularly susceptible, as are babies, youngsters, pregnant women, and seniors.

Sources of Carbon Monoxide Gas

The winter heating season is when a bulk of carbon monoxide direct exposures occur due to using unvented supplemental heaters. An unvented supplemental heater is a type of space heater that utilizes indoor air for heating and vents the gases produced in the heating procedure out into the house. The majority of heaters of this type use kerosene or natural gas for fuel. While newer designs have oxygen sensing units that turned off the heater when the oxygen level in the room falls below a particular level, older designs do not have such safety functions. Because of these safety troubles, unvented space heaters have been banned in a number of states. Other sources of carbon monoxide are malfunctioning cooking equipment, tobacco smoke, clogged chimneys, automobile exhaust, malfunctioning furnaces and gas clothes dryers, wood burning fireplaces, and a water heater.

Signs of Carbon Monoxide Poisoning

Below are the most typical symptoms of carbon monoxide poisoning however they are not always the exact same for every person who has actually been exposed and often times are similar to having food poisoning or the flu. A physician can assist in identifying for sure.

headache
dizziness
weakness
queasiness and throwing up
rapid heart beat
seizures
cardiac arrest
loss of hearing
fuzzy vision
disorientation
loss of consciousness or coma
respiratory failure

Defense By Proper Gas Appliance Venting

The CDC offers the following information on avoiding CO2 poisoning by making certain ones home appliances are vented properly.

  • All gas appliances must be vented so that CO will not build up in your home, cabin, or camper.
  • Never burn anything in a stove or fireplace that isn’t vented.
  • Have your chimney checked or cleaned every year. Chimneys can be blocked by debris. This can cause CO to build up inside your home or cabin.
  • Never patch a vent pipe with tape, gum, or something else. This kind of patch can make CO build up in your home, cabin, or camper.
  • Horizontal vent pipes to fuel appliances should not be perfectly level. Indoor vent pipes should go up slightly as they go toward outdoors. This helps prevent CO or other gases from leaking if the joints or pipes aren’t fitted tightly.  (read more…)

It is definitely crucial to have CO2 detectors in the house. The Colorado State University Extension offers the following tips when picking a CO2 alarm.

  • Some inexpensive alarms consist of a card with a spot (spot detectors) that changes color in the presence of CO. The absence of an audible signal does not meet UL or IAS requirements for alarms, so these devices do not provide adequate warning of CO.
  • Some CO alarms have a sensor that must be replaced every year or so. The expense of this part should be a factor in purchase decisions.
  • Battery-operated alarms are portable and will function during a power failure, which is when emergency heating might be used. Batteries must be replaced, although some alarms have long-life batteries that will last up to five years.
  • Line-powered alarms (110 volt) require electrical outlets but do not need batteries. They will not function during a power failure. Some line-powered alarms have battery backups.
  • Some alarms have digital readouts indicating CO levels. Alarms with memories can help document and correct CO problems.  (read more…)

The following video gives some good safety ideas for water heaters.

Not to scare anybody, but we likewise wanted to include the following video of a water heater set up that is not working properly and is harmful.

Please see a doctor promptly if you suspect that you or a member of your family might have carbon monoxide poisoning. Water Heater Repair Syracuse NY can not stress enough the need of making certain a professional plumbing repair business services and installs any water heater equipment in your home or business.

Syracuse Water Heater Venting Options

Posted by on May 13, 2014 in Water Heater Repair Syracuse NY | 0 comments

The following concepts about appropriate water heater venting from Water Heater Repair Syracuse NY below are shared in order for house owners to have a general understanding of exactly how the different types of venting work. They are not planned to be how-to directions for house owners to perform themselves. The training and licensing of an expert plumbing repair service expert is very important.

In terms of venting, water heaters are typically vented in 2 methods; direct vent water heaters and power vent water heaters. So what is the leading distinction between the 2 styles of water heaters? A direct vent water heater vents the combustion gases created from the water heater’s burner directly to the atmosphere, while a power vent water heater eliminates them with the help of a powered ventilation fan.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent Syracuse Water Heaters

With a direct vent water heater, the heat generated during the combustion procedure is utilized to heat the water. The exhaust gases are then transferred to the exterior of the home via the exhaust pipe or chimney.

With direct venting, it works with the process that heated air is lighter than cool air and in turn will rise normally due to the difference in buoyancy between the hot and cold air. This is a good simple system that works well when the exhaust gases can be vented vertically. No extra power is required, and in turn the overall hot water heating costs are lower.

The following video explains in more detail the details of a direct vent system:

Power Vent Syracuse Water Heaters

Power vent water heaters utilizes a fan or blower to assist in the removal of exhaust gases from the hot water heater. For houses that do not have access to a vertical vent or chimney, power vent water heater might be the only choice. With using a fan or blower, exhaust gases can be pressed with horizontal exhaust vent pipes.

The primary advantage of a power vent water heater then is the ability to locate the water heater away from a chimney. Or if there is no chimney offered, to save money by horizontally venting it to the outside through affordable venting pipe rather.

The downsides of a power vent system against a direct vent heater are that power vent heaters will cost more at first because of the extra devices (fan/blower) needed for the install. Also, one will likewise have to run a power line to the fan. This too, will contribute to the expense.

Another downside is that the blower section of the water heater will need electrical energy to run. This will raise the hot water heating costs throughout it’s life time, though not that significantly.

And lastly, the blower noise can be heard running when the hot water heater is running. While it’s most likely only a minor concern, it’s something that will be seriously considered. Appropriate setup can assist to remove, or at least minimize the majority of this.

Though there are some differences between the two types, it really depends on a home’s specific situation, in relationship to the location it is to be installed, and the ability to add a vent path to the outside of the house.  Syracuse Water Heater Repair recommends taking a look at the ENERGY STAR info right here too in terms of the various energy efficiency ratings for the different types of sorts of heaters.

Enhanced by Zemanta

Sizing A New Syracuse Water Heater

Posted by on Apr 23, 2014 in Water Heater Replacement Syracuse NY | 0 comments

Shopping around for a brand-new water heater? For numerous people, it is not the most thrilling kind of shopping to do, and for most people it may not be the simplest. The majority of water heater repair companies will certainly do a great job of making good ideas for ones options. If one is inclined to do some more in depth study oneself, below are some links that will be helpful.

Energy Expense Calculators
The U.S. Department of Energy has an energy cost calculator for electric and gas type water heaters on its website that is useful. It might appear a little challenging, however one should have the ability to fill in the majority of the fields and get a rough idea of how much it will cost to run the heater.

Water Heater SizingWater Heater Repair Syracuse NY

Many of the manufacturers of water heaters have sizing calculators on their websites to determine what the appropriate size heater will be considering the amount of water to be heated at peak times of the day. Here are links to A.O. Smith  and Bradford White.

Many gas providers have nice tools on their websites to identify costs also. Check with your local gas or electric company to see what they have available. Likewise, here is a cool tool from the River Network in Portland, OR that will analyze the energy and greenhouse gas emissions for any location in the United States.

Don’t hesitate to get in touch with Water Heater Repair Syracuse NY with any questions you might specifically have with determining the best size water heater for your Syracuse house.

Check out our Water Heater Replacement Syracuse NY page too…

Preventative Syracuse Water Heater Repair

Posted by on Apr 1, 2014 in Water Heater Repair Syracuse NY, Water Heater Replacement Syracuse NY | 0 comments

Most do not ever think about the state of their water heater Water Heater Repair Syracuse NY knows. Rightfully so, as long as it is running properly. However, a little water heater maintenance can go a long way toward lowering the number and frequency of repairs, and really assists to extend the life of the heater, preventing very early replacement. Discover how maintaining your water heater can impact its life-span and give you fewer stunning moments of cold water.

A Healthy Syracuse Water HeaterWater Heater Repair Syracuse NY

While nobody can figure out exactly how long a water heater ought to last, an effectively serviced, quality water heater can last 8 – 10 years. Obviously, many factors will impact the life-span, consisting of electricity abnormalities, the quality of the water heater, and the mineral density of ones water. Regular water heater upkeep can likewise reduce electric costs by having it work more efficiently

Among things that destroys a water heater is mineral buildup. A great deal of cash is spent changing heating elements and entire tanks, when some upkeep along the way would help to prevent this cost from occurring. A healthy water heater is one that is insulated, clean, and without electrical wiring faults.

Issues with ones water heater generally become clear: A hot water faucet fails to bring hot water, you see dripping or puddles near the water heater, or the tank sends out weird gurgling or popping sounds. These are a couple of sign telling you when your hot water heater requires changing.

It would be good to understand before your water heater springs a leakage and causes a trouble or even worse yet damage to your house. If you determine you have a few of the early sign you will have time to review your choices of sizes and models and select a qualified installer as opposed to hurrying to find a replacement water heater on a Friday afternoon or even worse on a weekend.

Below are some indications that you may be ready for a brand-new hot water heater

Age: On average, your gas hot water heater need to last anywhere in between 8 to 12 years, while an electric model will last a bit longer at 10 to 15 years.
Discolored Water: When you utilize your hot water tap, does the water look a bit tinted? If so, there might be rust in your water heater, which is a possible sign your hot water heater is revealing signs of wear and may start to leak.
Banging or Popping: When there is a buildup of hard water sediment in the water heater,it may could sound like explosions. These noises are caused by the difference in water temperature inside the tank as fresh cold water is mixed with the heated water of the tank.
Moisture: Look around the base of the water heater for moisture, for this could be a sign of a slow or intermittent leakage.
Cold Water: An unanticipated cold shower is not only bad way to start your day, but of a hot water heater that has to be taken a look at.
Major Water Leaks: It’s time to call Water Heater Repair Syracuse NY now.

Enhanced by Zemanta

The Latest in Water Heater Redesign

Posted by on Mar 17, 2014 in Water Heater Technology | 0 comments

There is a new water heater in town and it possibly could be the best thing in brand-new innovation in the water heater market in quite a long period of time. It is from the ISI Technology company and certainly makes use of modern technology in its building. Combine smart grid technology and a heck of a tankless design and one gets the HEATWORKS MODEL 1.Water Heater Repair Syracuse NY

The company very swiftly more than exceeded its funding for the project this past February and is taking pre-orders for the device. So, needless to state, we have actually not gotten our hands on an unit to check it out, however it does look really promising.

According to Greg Tew of the School of Architecture + Design at Virginia Tech, “Water heaters, as most of us know them, have been around for more than 100 years, and rely on antiquated technology to deliver one of the most important amenities in the home. ISI has developed a much needed technological overhaul to the water heater that delivers the benefits homeowners demand. By delivering impressive levels of comfort, savings, reliability and connectivity, the HEATWORKS MODEL 1 brings the water heater into the modern, connected home.”

Here’s How it Works:
Instead of the standard resistance heating elements, it makes use of modern electronic technology to directly heat water molecules with 2 graphite electrodes and the water’s own resistance. This type of water heater makes many of the parts of traditional water heaters unnecessary; less parts, fewer methods of breakdown and possibly a longer life for the water heater. Like not needing metal interior parts that will rust and develop sediment in the tank holding the water; no anode rods that will end up being used up and release aluminum in the water; and no flow switches that may stop working. Oh, and it is WIFI compatible.

Unlike existing tankless water heaters that require a minimum of a particular amount of water flow to trigger the heater to heat water streaming from a faucet, this will kick in at flow rates of .1 gallons per minute, which makes it an excellent suitable for low-flow faucets too. Also, another benefit over current tankless water heaters is the voltage required to run the unit. Lots of tankless models require a relatively high voltage, and sometimes users have to upgrade their present outlet and/or circuit box to accommodate for the high electrical power pull. However, the HEATWORKS has an auto-sensing function so it can fit in with ones present electric box, and the unit can be adjusted with a screwdriver to set it in a different way.

Through independent testing, the business has concluded that the MODEL 1 is up to 40 % more energy efficient than conventional water heaters and up to ten percent more water efficient than the normal tankless water heater.

We waited to share this till the end – it is about the size of a football (12.5 inches by 6.5 inches) too, and can be installed anywhere.

One will most likely need more than one to heat up the water in the whole house, however that would be a simple sufficient fix or retrofit for the systems Water Heater Repair Syracuse NY is thinking. Here is a link to a sizing graph ISI Technology has on their website.

Related Product Information:

ecopreneurist.com

cleantechnica.com

www.kickstarter.com

www.treehugger.com

www.engineering.com

Syracuse 10 Minute Water Heater Maintenance Check

Posted by on Feb 26, 2014 in Water Heater Repair Syracuse NY | 0 comments

We are going to put you to work today, however just for about 10 minutes. Yep, that’s all it will consider these 2 important water heater maintenance tasks; nevertheless, Water Heater Repair Syracuse NY knows they will do an excellent task of helping with three things:

  1. Having your water heater last as long as possible (that will save you cash).
  2. Ensuring the water heater runs safely (we do not desire it to blow up).
  3. Having it run as energy efficiently as possible (likewise conserving you money).

So with that in mind, are you ready to invest ten minutes once or two times a year to assist in saving some cash? Water Heater Repair Syracuse thought so.

Testing the T&P Relief Valve

Commonly called the T&P Valve, or the temperature and pressure relief valve, has an important job. It assists see to it excess pressure does not develop inside the water tank, or in much more basic terms, it makes sure the water heater does not explode. As the image shows, it has a lever or little handle on it. All you have to do is raise it part method then let go of it. Ideally, it snapped back to its closed position quickly. If it is working correctly, a little water can be heard going into the drain pipe below the lever you just raised and you perhaps heard some pressure being released. If none of these things have taken place during the test, the valve will have to be replaced.

As inspectapedia.com states: “dripping TP relief valves are unsafe. The hazard is that minerals in the water supply accumulate inside the valve during the passage of hot water through the valve assembly. That accumulation of scale will eventually block operation of the relief valve, causing the relief valve to fail to operate properly if unsafe pressure or temperature occurs in the water heater in the future. The risk, ultimately, is a water heater tank or heating boiler explosion.”  (read more…)

Do a Mimi Water Heater Tank Flush

By nature, rust and corrosion will occur inside the water tank thanks to the chemical reactions taking place with all the parts inside that are needed to warm the water. We will not get too technical here, however it is simple to help prevent this from happening by doing a flush or draining of all or some of the water in the tank.

For just a small flush, put a pail under the drain valve below the tank. Open the drain valve and fill the pail with water. Drain at least a few gallons of water in total. Let the water sit in the container for a few minutes to settle and examine if there is much that settles to the bottom of the container. If there is, if the water heater has not been drained for a long period of time (or ever), it would be best to do a full flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature dial down and could desire to let the water cool down for about an hour initially so it is not too hot while draining it. Likewise, it would be easier to connect a hose to the drain valve and let the water go outside instead of using buckets.

If the water looks reasonably clean and clear from the small test you should be all set. When the water heater has a large amount of sediment inside of it, it can make loud popping noises and it cuts down on its efficiency too.

Though water heaters are relatively upkeep free and not hard to operate, any time you feel the tiniest uncomfortable or are not sure of what to do, it is always best to have a plumbing professional aid with the circumstance.

Water Heater Repair Syracuse NY

The Best Water Heater Temperature Setting

Posted by on Jan 26, 2014 in Water Heater Repair Syracuse NY | 0 comments

There are diverse views on exactly what is the best temperature level at which to set ones water heater. Water Heater Repair Syracuse NY will be sharing a few of the different views with specific evidence from those sources in order for one to make his or her own choice on the topic.Water Heater Repair Syracuse NY

First of all, the default setting most water heater manufacturers have their tanks set at is 140 degrees. If you have actually never examined this already, that may be the temperature it is set. Likewise, it can be hard to know for sure what the temperature setting is because numerous times the temperature level dial does not have actual degrees written on it, just warm, hot, really hot … something to that effect. Some people feel they are pre-set at a higher temperature so it feels excellent to have a great deal of hot water – kind of like trying to produce great brand awareness in consumers.

In regards to energy cost savings, by turning a water heater down from 140 to 120 degrees, it will conserve in between 6 to 10 percent of energy usage. That equates to in between $6 to $20 a year most of the time.

Let’s begin off with the most likely the most popular source, the U.S. Department of Energy. They suggest a setting of 120 degrees. The link with their website above provides lots of excellent information on the best ways to minimize ones hot water consumption and expenses. It is certainly worth a read.

Now for the health threats of too low of a temperature setting. It can be concluded that Legionella bacteria has the ideal development range between 68 to 122 degrees. Treehugger states that “25 percent of all water heaters have varying levels of Legionella bacteria contamination.”

According to The National Center for Biotechnology Information: “There are two opposing risks when it comes to water temperature inside domestic water heaters; exposure to Legionella, the bacteria responsible for Legionnaires’ disease (pulmonary legionellosis), and the risk of scalding.” (read more…)

Legionella bacteria triggers a type of pneumonia and is passed to people when one inhales water contaminated with the bacteria – typically in showers, whirlpool baths or even air conditioning systems. Consuming the water is typically ok. It is an issue with having the germs get in ones lungs.

The Centers for Disease Control and Prevention estimates 8,000 to 18,000 Americans contract the disease every year. 5 to 30 percent of the cases are fatal.

According to the Occupational Safety & Health Administration, here are some of the factors that can increase the risk of getting the disease:

  • Organ transplants (kidney, heart, etc.)
  • Age (older persons are more likely to get disease)
  • Heavy smoking
  • Weakened immune system (cancer patients, HIV-infected individuals)
  • Underlying medical problem (respiratory disease, diabetes, cancer, renal dialysis, etc.)
  • Certain drug therapies (corticosteroids)
  • Heavy consumption of alcoholic beverages

Cases to not have the water heater temperature level set at 140 degrees would be if there are children in the residence or possibly with elderly people too. The threat of being burnt if the faucet was fully on hot water can be too great. Undoubtedly, anybody living in the home that is at risk of contracting Legionella Disease need to have it set at 140.

Summary

So choose if there are any concerns of people burning themselves if the water temperature is too hot. Likewise, be aware of any individual who has issues of contracting Legionella Disease. Because the yearly expense savings of turning the temperature down is just about $20 most the time with the typical home’s hot water usage, it may be an excellent choice to keep the temperature level above 120 degrees just for the health related benefits; nonetheless, Water Heater Repair Syracuse NY will let you make the call.

The following 2 videos demonstrate how to adjust the temperature level on both an electric and a gas water heater in case you are uncertain exactly how to do so.

How to Change the Temperature on an Electric Hot Water Heater

How To Change The Temperature On A Gas Water Heater

Read more articles in our blog.

Polar Vortex vs Your Syracuse Water Heater

Posted by on Jan 7, 2014 in Plumbing Repair Syracuse NY, Water Heater Repair Syracuse NY | 0 comments

So with Polar Vortex upon us, let Water Heater Repair Syracuse NY make sure ones water heater and water pipes will survive its fury! Nationwide, over 250,000 Americans typically have some sort of damage to their homes due to flooding from broken pipes. With this sort of cold weather we are experiencing now, that number may be even higher.

Here’s the big picture from The Weather Channel (click the name for the latest weather information):

When outdoor temperatures go below 20 degrees is when water pipes can begin to freeze. Definitely, many parts of the country are experiencing temperature levels much lower than that, and parts of the country that generally do not experience temperatures that reduced!

The Polar Vortex is breaking temperature records. For most places, it is the coldest it has been in over 20 years—Illinois, Indiana, George, Virginia, Oklahoma, Texas and New York all posted record lows (via Fox News).

So how does one assistance avoid pipes from freezing and breaking?

There are two means to do so. The first is to avoid heat loss from the water inside ones pipes. The 2nd is to make sure there is space for growth inside a pipes in case ice types. If you have city water, the major pipes that provide the water are normally deep enough to avoid freezing; nonetheless, once the water lines are at the ground surface area level when they reach ones property, is when the issues begin.

Insulation is the name of the game!

Insulation is not simply for the hot water pipes, however the cold water lines too. Even pipes inside the house – those in the attic, basement, a crawl area – must be covered in foam pipe insulation or wrapped in pipe insulation tape. Areas where it will definitely be cold, like in a garage, is the water heater found there, electrical heat tape can be used.

It can be useful to leave cabinet doors in the kitchen and restrooms open to assist with the warm air flow of the house to keep pipes a little warmer too. Make certain to keep the garage door closed and any vents into a crawl space shut as well.

Leaving faucets open a little so a trickle of water can run with them can help. It will help alleviate the construct up of pressure in the pipes, though it is not a full protection against a frozen pipe. Heck, even falls freeze!

When it comes to the water heater, many companies make water heater blanket kits that fit around the tank. There can be really beneficial in helping the water heater keep the heat inside the tank, so the device is not having to continuously run to keep its set temperature level. This, certainly, also assists conserve energy dollars too!

See to it one knows where the water turned off valve is found in the home in case a plumbing does burst, one can turn the water off to prevent significant water damage.

According to CNN, “The record cold in many areas is putting a strain on electric grids — creating dangers that more people could lose power.”

Water Heater Repair Syracuse NY suggests making sure one is ready in the case of a power outage, especially with these record low temperatures!

Polar Vortex

Source: NOAA/NASA GOES Project

Community Resources:

City of Syracuse water Department

Video Overview of Water Heater Repair Syracuse NY

Posted by on Jan 3, 2014 in Plumbing Repair Syracuse NY, Water Heater Repair Syracuse NY | 0 comments

We simply made a brand-new company video review for Water Heater Repair Syracuse NY and we desired to share it with you today. Do not think twice to contact us for any plumbing repairs and installations that you may need to have done at work or at home.